Burris Eliminator 4-12x42 Laser Scope Riflescope

Burris Laserscope Eliminator - In a split second, the Eliminator Ranges Your Target, Calculates Your Trajectory and Illuminates Your Perfect Holdover

No more guessing yardage or fumbling with a shaky handheld rangefinder. No more losing sight of your trophy. No more guessing holdover. The Eliminator knows the precise horizontal distance to your trophy and exactly what your cartridge will do. Eliminator lights a 1/3 MOA illuminated aiming dot showing exactly where your shot will go. With The Eliminator, just Range, Aim, and Fire.

Starting with the field-proven and bright crystal-clear optics of the original Burris LaserScope, The Eliminator provides a sophisticated yet very simple and accurate means of tailoring the scope’s trajectory compensation to virtually any cartridge.

Sophisticated Technology Made Simple, Simple, Simple.

Simply enter one of the 40 drop numbers into the Eliminator. In a split second, the Eliminator factors in the distance, the angle of the shot, and the ballistics of your cartridge, and presents a lighted dot for the perfect holdover.

Ballistics Tables Made Simple

All you need to know is the drop in inches at 500 yards when your cartridge is sighted in for 100 yards. Burris provides this ‘drop number’ for more than 600 commercial cartridges. With your drop number established, you decide if you prefer a sight-in at either 100 or 200 yards (or meters).

Programming Made Simple

1. Simply press both the ON button and the forward part of the MODE button for six seconds to enter SET-UP MODE.

2. Select either (Y)ards or (M)eters, press
the forward button.

3. Select if you prefer a (1) 100 Yard
Sight-In Distance or (2) 200 Yard Sight-In Distance, press the forward button.

4. Select the two digit Drop Number (23 thru 63) and press the back button. Your done!

Precision Made Simple

Sight-in your gun at your selected sight-in distance of either 100 or 200 yards. Then verify point of impact by actual shooting at 500 yards. Depending on the exact ammo performance, your gun’s barrel length, the elevation, and any extreme temperatures, you might need to increase or decrease your Drop Number by a couple of digits for exacting performance.

Life Made Simple

Your programming is stored in the scope no matter the condition of your battery and it will still remember your programming with no battery at all.

Ultra Low Mounting System

A proprietary mounting system developed by Burris allows for the lowest possible mounting of the LaserScope. Other mounting systems tend to position comparable scopes as much as two ring sizes higher, which inhibits natural shooting posture.

The Hunt Made More Enjoyable and Successful

The Burris Eliminator LaserScope is in a league of its own. No other riflescope combines this level of quality, technology, accuracy, simplicity, repeatability and effectiveness. It will greatly increase the distance at which you can be confident in making an ethical shot. You do the hunting and shooting, the Eliminator will do the memorizing and calculating. The Eliminator is affordable and of a size and weight that’s welcome for everyday field use. The revolutionary new Eliminator is a brilliant riflescope innovation that ensures long range hunting success.

• Laser Range (yards reflective) 800
• Laser Range (yards deer) 550
• Laser Accuracy +/- 1 yard
• Batteries CR2
• Battery Life 1100 cycles
• Operating Temperature 14°F - 122°F
• Dot size @ 100 yards  .33 MOA 
• Field of View Low-High (feet) 25-9
• Exit Pupil (mm) Low - High 10.5 - 3.5
• Click Value(Inch @ 100yards) 0.25
• Max Adj. (Inch @ 100yards) 50
• Weight with mount & battery 26 oz
• Optimum Eye Relief (Inch) 3 - 3.5
• Objective End Dia (mm) 60
• Clear Objective Dia (mm) 42
• Ocular End Dia (mm) 39
• Overall Length (Inch) 13
• Mounting Rail Length 5.7